Firproof Interior Waterproof movable hall partitions panel

The ultra-high Moveable Partition Wall used in large and important places such as hotel banquet halls and conference halls refers to the space specially used to separate the interior, with stronger and more flexible applications, such as partition walls, partitions, movable display boards, movable screens, mobile Partitions, mobile screens, mobile soundproof walls, etc., movable partitions are easy to install and reusable. The large space of the site is divided into several small spaces, and finally a large space can be combined. The function of the movable divider walls is the same as that of the general wall, and it can play a role of multi-purpose in one hall and one room.

The movable partition wall has an advanced professional configuration system, the Moveable Partition Wall can automatically turn, and the guide rail is equipped with a professional guide block.

Push and pull are not blocked, smooth and not stuck.

When the movable partition wall is pushed, and encounters a turning point or a pushing point, the guide blocks in the guide rail will automatically guide the movable partition wall to other designated tracks to slide. % of the gravity acts on the ground, reducing the load pressure of the top steel frame and the track, enhancing the stability and improving the durability of the movable partition wall.

The super high partition wall of the automatic turning system has the following characteristics:

What are the precautions for the installation of ultra-high movable divider walls ?

1) Before installation, carefully observe the overall construction environment and surrounding environment where the movable partition wall needs to be installed. Investigating the site environment is the primary task, mainly to determine whether the site has the installation conditions, carefully look at the position of the beams and columns on the roof, the position of the reserved space and the position of the air-conditioning piping system, and record them one by one for the final planning. construction plan.

2) Firstly, according to the measurement results, locate and survey, and according to the requirements of the construction drawings, release the position control line of the movable partition on the indoor ground of the site, and then guide the position line of the partition wall to the side wall and the top plate. Secondly, the installation position of the fastener should be popped up when the wire is bounced again: the height of the installation must be agreed with the construction team installing the ceiling, so as to avoid too much unnecessary trouble.